MQC ONE Kit Pure Carbon Fibre - Ready to Build

Be the first to review this product

ONE single purchase to enable you to get your Mini Quad Club ONE in the air, supplied with a proven set-up guaranteed to give you a great experience (4s capable)

Includes a genuine Naze REV6 flight controller, a PDB offering both 5v and 12v outputs (for FPV), BLHeli ESC's (both firmware and bootloaders), 2204 Motors and Bullnose Props. With the added edition of cable wrap, cable ties  and larger heat shrink which will allows for a cleaner build.

The Mini Quad Club is the world's largest social network dedicated to mini quads and FPV racing, every sale of the MQC ONE enables the network to grow and expand.

Includes a limited lifetime parts warranty*, this may be the ONE you have been waiting for... #MQC4LIFE

Join the Mini Quad Club Facebook Group to keep up with all the latest news and updates. 

Additional required items: Receiver, Battery, Velcro,  male to male servo leads for your receiver to the flight controller

This kit requires good soldering skills, a computer to setup the Naze flight controller and some experience with RC. This is a serious kit and not a toy. 
PLEASE NOTE: We cannot accept any returns after the Naze board has been soldered/modified. Please test the board (via USB) BEFORE soldering the header pins on.

Sign up for price alert Sign up to get notified when this product is back in stock

Availability: Out of stock

Regular Price: £166.65

Special Price £150.00

Additional Information


Product Description


ONE single purchase to enable you to order everything you require to build the Mini Quad Club ONE

  • Mini Quad Club ONE 225mm Full Carbon Frame
  • DYS 20a BL20 ESC's, incuding BLHeli Bootloader and Firmware supporting ONEShot (Qty 4)
  • SUnnySky 2204 2300KV Brushless Motors (Qty 4)
  • 5040 DAL Bullnose Props (Qty 2 Packs - 8 props)
  • Naze32 Acro (Genuine rev6 board from AbuseMark, not a cheaper Chinese Copy)
  • Active Power Distribution Board with 5v + 12v BEC
  • Black Nylon Flight Controller Fixing Kit
  • XT60 Male Battery Connector with 10cm pre soldered 16AWG wire
  • Black HeatShrink (2.4mm for ESC's, 38mm for mounting ESC's to arms
  • Black 10mm Cable Wrap to give a cleaner look to your build
  • Black Cable Tie Wraps
  • Male to Male servo lead to connect from PDB to Naze

Additional required items: Receiver, Battery, Velcro, Cable Ties, male to male servo leads for your receiver to the flight controller

We stock LemonRX receivers, these are suitable for Spektrum transmitters.

Props supplied are DAL extra strong bullnose giving you more flying time in a crash.


Material 3K twill matte carbon fiber
Prop Support 5"
Airframe Size 225mm
Dry Weight 123g
Race Weight ~ 490g (with 1300mah 4s lipo)
AUW Weight ~ 560g (with 1300mah 4s lipo and GoPro/Yi)
Hardware All metal bolts and nuts with aluminum standoffs
Body Top plate, Mid-plate, Bottom Plate, 4 arms

Recommended Setup:

Motors 2204 2300kv
ESCs 20amp with BLHeli 14+
Props 5" bullnose
Lipo 1300mah - 1400mah 4s
VTX 200mw
Receiver D4R-II / X4RSB / LemonRX PPM / LemonRX 6 Channel DSMX
FPV cam Mini PZ0420 with swivel mount / PZ0420 board cam

Warranty Information
The warranty covers the carbon fiber frame pieces for the lifetime of the frame. When/if the model is discontinued, the warranty will no longer be valid. During the frame "lifetime", MQC/ will replace any carbon fiber part in the kit if it is broken under normal flying conditions. Simply send a photo of your damaged part to us, and we will send you a replacement FREE (shipping not included). MQC/ reserve the right to limit the number of replacements if there are signs of abuse of the policy. Offer void where prohibited. All rights reserved.

Additional Information

Additional Information



Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

No questions yet. Be the first to ask the question!