Bluetooth Adapter for Multiwii / Naze32 / CC3D

Be the first to review this product

The perfect addition to use your Android phone (iPhone not supported) to tune in the field.

Simple to add and simple to use

Sign up for price alert Sign up to get notified when this product is back in stock

Availability: Out of stock


Additional Information


Product Description


Connecting this adaptor to the Naze could not be easier.

You will need the two pins in the middle of the board soldered (see pictures), if you don't have these, they are included with the Bluetooth Module.

The two pins are clearly marked TX & RX.

The RX from the Bluetooth connects to the TX on the Naze and vice versa.

As the Bluetooth is supplied with a 4pin plug you need this, gently prise the small black tab from the plug and release the wires one at a time.

Connect these to the Naze (it is worth using some small heatshrink over the pins to ensure they cannot short out). The power is supplied from the Naze using the very end pins (6), Black on the bottom and Red in the middle.

Power the Naze board, you will see the Green (or Blue) LED light up on the Bluetooth, and the red light flashing. Enable Bluetooth on your Android phone (iPhone is not supported), search for Bluetooth devices, when this is found enter the code 1234, the Bluetooth will then connect to your phone. The Red LED will go solid. You can now download the Naze or MultiWii app from the play store and configure your Naze board.

Pairing code: 8888

LED State indicator:
- Green/Blue: Power indicator (on when powered)
- Red: Sold when connected, flashing when not connected


  • Bluetooth module
  • 4 pin connect cable ×1(200mm)
  • 2 header pins (to solder to the Naze Board)

Additional Information

Additional Information



Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

No questions yet. Be the first to ask the question!