Google+

Matek Mini Power Hub Power Distribution Board With BEC 5V And 12V

Be the first to review this product

The Matek Power Distrubution Board has been engineered to provide the highest possible performance and reliability in a 36*36mm & 4 layers PCB.

The PDB supplies power from yout battery to 4 ESCs as well as providing two synchronised & regulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc.

This can be powered using Lipos from 3S to 6S, enabled with a transient-voltage-suppression (TVS) diode this will protect the BEC input against spikes/p>

Solder bridge are provided to enable you to select coltages for cameras and VTX's




Sign up for price alert Sign up to get notified when this product is back in stock

Availability: Out of stock

£4.57

Additional Information

ID9000000000595

Product Description

Details

Features:


- 2oz copper & 4-layers PCB.
- ESC & Battery solder tabs in pairs.
- Solder Bridges of various voltage for Camera & VTX.
- DC/DC synchronous buck regulator, Efficiency is up to 95%.
- TVS(Transient Voltage Suppressor) protection for DC/DC chip.
- 5V & 12V Output LED indicators & Short circuit tolerant.
- Size : 36 x 36mm
- Weight: 6.5g 
- Mounting holes 30.5mm square spacing

Specification:
General:
- Input voltage range (2S-6S operation): 7.2 - 26VDC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 4 ESC outputs

ESC outputs:

- Continuous current: 20A per output
- Peak current (10 seconds/minute): 30A per output

BEC 5V output:

- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 3 Amps               
- Short-circuit tolerant (10 seconds/minute)
- LED (indicates voltage is in regulation, within 10%)

BEC 12V output:

- The battery should be 4S~6S LiPo
- Standard output designed to power cameras and video transmitters,etc.
- Voltage: 12.0 +/- 0.2VDC
- Continuous current: 2 Amps (Max.3A 10s/minute)
- Short-circuit tolerant (10 seconds/minute)
- LED (indicates voltage is in regulation, within 10%)

CAM & VTX voltage bridge

- 3S operation. choose “VCC” for 12V camera & 12V VTX,  VCC=Battery Voltage.
- 4~6S operation, choose “12” for 12V camera & 12V VTX
- 3~6S operation, choose “5” for 5V camera
- Video pass through from the “CAM” pad to the “VTX” pad

Additional Information

Additional Information

ID9000000000595

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

No questions yet. Be the first to ask the question!