Google+

DSMX 10-Channel + DSMX Satellite (DSM2 compatible) - LemonRX

Be the first to review this product

  • 2.4GHz DSMX 10 Channels Full Range Receiver (Failsafe with UART output)
  • DSMX fully Spektrum compatible (backward compatible with DSM2)
  • 43(L) x 34(W) x 13.5(H) mm
  • 12.5g without satellite


We currently have no date for the next delivery from Lemon-RX.
Sign up for price alert Sign up to get notified when this product is back in stock

Availability: Out of stock

£15.27
  • Buy 2 for £14.25 each and save 7%
LemonRX

Additional Information

ID9000000000164
Frequency2.4 GHz
Receiver Channels10 Channels
TX TypeDSMX

Product Description

Details

Type DSMX 10 Channels Full Range Receiver (Failsafe with UART output)
No. Channels 10
Modulation DSMX fully Spektrum compatible (backward compatible with DSM2)
Band 2.4GHz
Dimension 43(L) x 34(W) x 13.5(H) mm
Weight 12.5g without satellite
Voltage Range 3.45 - 7.2V

Binding (Method 1) Setup

  1. Insert the bind plug into the receiver
  2. Connect the battery to provide power to the receiver
  3. Ensure the transmitter is at least 2 meters from the receiver and activate binding
  4. Once binding is complete, remove the bind plug.

Video: https://www.youtube.com/watch?v=FZsHGEW2zPY&feature=youtu.be

Binding (Method 2 - Enable Failsafe) Setup

  1. Insert the bind plug into the receiver
  2. Connect the battery to provide power to the receiver
  3. Ensure the transmitter is at least 2 meters from the receiver and activate binding
  4. Set your transmitter sticks to the failsafe position (typically 0 throttle and centered sticks)
  5. Press the pushbutton (on the side of the receiver) to memorise the current position in Failsafe mode
  6. The green light will turn on at the bottom of the receiver to indicate Failsafe is successfully enabled
  7. Once binding is complete, remove the bind plug.

Video: Binding without Failsafe

Failsafe Disable
  1. Rebind the receiver without pressing the side pushbutton, this will disable the Failsafe mode
  2. Green light off indicates Failsafe disabled

Video: Binding with Failsafe

Failsafe Details
This receiver supports a failsafe mode for all 10 channels. The failsafe settings are saved even after the receiver has been disconnected from its power source.

When the primary receiver and satellite receiver is unable to detect any RF signal for continuous time interval of approximately 3 seconds, all channels will be restored to the saved setting. At this point the receiver will try to find valid RF signal. If valid signal is detected, the receiver will use the valid signal immediately.

With the bind plug still plugged in after successfully binding, pressing the memory button (on the side of the receiver). This will cause the receiver to memorise all channels settings at the time the button is pressed for use in failsafe. If the failsafe is enabled correctly, green light should be on at the bottom of receiver. Press mem. button (on the side of the receiver) again while the bind plug is still plugged will cause the green light to turn off. This indicate the failsafe mode is disabled. Take the bind plug out before flying!


Additional Information

Additional Information

ID9000000000164
Frequency2.4 GHz
Receiver Channels10 Channels
TX TypeDSMX

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

No questions yet. Be the first to ask the question!

Please note:

  1. Spektrum™ , DSMX and DSM2 are trademarks of Horizon Hobby, Inc.
  2. This product is not a Spektrum™ DSMX or DSM2 product, nor is it a copy or clone of a Spektrum™ DSM2 or DSMX product.
  3. This product is Lemon-RX product, where quality is guaranteed.
  4. Lemon-RX products are tested to be compatible with Spektrum™ ‘DSMX and or DSM2 transmitters’